 |  |
Machine Operation: This machine takes all of the different sized parts shown on the front of the machine
(see photo below) and feeds them down the tracks to a station where the “trunion” is clamped in the closed
position, the cap pressed in place and the finished assembly is ejected into the discharge bin visible under the
machine. No adjustments are required in the tooling for the different sized parts
(see photo below) and feeds them down the tracks to a station where the “trunion” is clamped in the closed
position, the cap pressed in place and the finished assembly is ejected into the discharge bin visible under the
machine. No adjustments are required in the tooling for the different sized parts
Close up view of
closed and capped
finished assemblies
on the bottom row
with open blanks on
the top row. Caps are
to the far right.
closed and capped
finished assemblies
on the bottom row
with open blanks on
the top row. Caps are
to the far right.
| |
| Trunion Assembly Machine |