 |  |
Fixture for soldering flex cable on LCD screen to circuit board. Shown In soldering position.
This fixture locates the circuit board into a known, fixed location. The flex cable is clamped and the operator adjusts
the X, Y and Theta adjustments on the platform holding the LCD until the contacts on the flex cable align with the
pads on the circuit board.
This fixture locates the circuit board into a known, fixed location. The flex cable is clamped and the operator adjusts
the X, Y and Theta adjustments on the platform holding the LCD until the contacts on the flex cable align with the
pads on the circuit board.
Close up showing circuit board
in place (located on pins) with
flex cable clamp open
in place (located on pins) with
flex cable clamp open
LCD with flex cable in place - ready
to clamp flex cable.
Knobs for X, Y, and Theta adjustments
are at the bottom portion of the photo.
to clamp flex cable.
Knobs for X, Y, and Theta adjustments
are at the bottom portion of the photo.
Clamp closed and
contacts on flex cable
aligned with contacts
on circuit board.
Ready to move into
soldering position
contacts on flex cable
aligned with contacts
on circuit board.
Ready to move into
soldering position
| |
| Reflow Soldering Fixture |